Bbe 482 User Manual

SONIC MAXIMIZER482User Guide and Reference Manual

INDIVIDUAL INSTRUMENTS8Use the BBE 482 in the effects loop or the main output of a guitar preamp. For keyboards, theoutput of the sub-mixer will be th

9SOUND CONTRACTORSDJ APPLICATIONConnect the BBE 482 into the processor loop of a pre-amplifier/mixer and hear the music come alive!The BBE 482 will ac

ServiceWe recommend that if at all possible, a BBE 482 which requires service be sent to our facility in Huntington Beach,California. We request that

Calibration Procedure for the BBE 482 (REV/S/ON 1.1)NOTE: THIS UNIT WAS TESTED AND CALIBRATED AT THE FACTORY. THIS PROCEDURE IS FOR QUALIFIED PERSONNE

12

13

14

15

NOTES:16

NOTES:17

i

5381 Production DriveHuntington Beach, CA 92649714-897-6766 • FAX 714-896-0736www.bbesound.comcovered by U.S. Patent 4,482,866 and other U.S. and fore

1Important Safeguards ……………………………………………………………………………………………………………iBBE Process Explained …………………………………………………………………………………………………………1-2Product Description …

Product DescriptionThe BBE 482 is a dual channel, single rack space device for use in -l0dBu line level applications. For each channel thereare one pa

1. LED DISPLAY: The LED display is used to indicate the output signal level of the BBE 482. Each number on the frontpanel corresponds to the output s

SpecificationsFrequency Response,process mode:……………………………Program controlledbypass mode: ……………………………10Hz to 50kHz +/-0.5dBu, -10dBu inputTHD, process m

LIVE APPLICATION: NON-POWERED MIXER5Connect the BBE 482 to the output of the mixing console. The output of the BBE will driveeither a crossover or a p

LIVE APPLICATION: POWERED MIXER6There are a couple of ways to configure the BBE 482 into a powered mixer. The ideal methodwould be into “Pre-Amp Out/P

RECORDINGMASTERING OR DUBBING7Use the BBE 482 for mastering the recording. Even if the BBE Process has been used on individualtracks, an improvement o